TealWash for motor vehicles

Wherever your motor vehicle goes, your hot water hand washing facilities can go too!

The TealWash is provided in 12 and 24 volt versions. The TealWash provides more than twenty twelve second washes from each filling of the 5 litre water tank.

The robust and easy to clean TealWash portable sink is the perfect solutions for motor vehicles – for hand washing on the move!

The Standard TW12 /TW24 units require no switch, with fully automatic control providing battery safety piece of mind. The TealWash for motor vehicles conforms to ECE Regulation 10 and EC Directive 72/245.

Vehicle Certification Agency

• Teal accreditation – E11*10R05/01*5528*02.
• Hand wash units for motor vehicles – Conformity of Production Compliance Statement.

12v and 24v TealWash installation and operating instructions »

TealWash cleaning instructions »

Real hand hygiene is achieved with fingertip tap operation, which provides hot running water at the ideal constant temperature of 38-40ºC.

Simply place a suitable container (not supplied) underneath the blue outlet pipe (see image above) on the TealWash to collect the waste water during hand washing.

The TealWash provides more than twenty twelve second washes, from each filling of the 5 litre water tank. And it’s easy to fill and empty with a large opening lid for a quick top-up with clean water. Close the bowl after washing and the waste water drains away.

Euro 6 compliant wiring and control

Teal vehicle units incorporate 3 wire technology. Standard battery positive – red wire, earth wire – black. The white wire is to be connected to the ignition control fuse.

Standard TW12

• When the vehicle is turned off, the battery state is quiescent at 12V.
• When switched on the ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 12.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-40ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 12.3V and the ignition signal has been dropped.
• The battery will not be therefore be drained by the TealWash.

Standard TW24

• When the vehicle is turned off the battery state is quiescent at 24V.
• When switched on the ignition control wire detects vehicle turned on. The voltage sensing software will turn the heater on when 25.6 volts are detected. Thereafter the heater will be monitored by the built in thermistor and control the water temperature at 38-40ºC. When the vehicle is switched off the unit will switch off having sensed the battery voltage has dropped to 25.1V and the ignition signal has been dropped.
• The battery will not be therefore be drained by the TealWash.